Resources

P92S and P92SP - Fleet-Lift™ Sandwich Panel Erection Anchor and Fleet-Lift™ Sandwich Panel Erection Anchor with Shear Plate

Accessories

Dayton

The Fleet-Lift Sandwich Panel Erection Anchor is designed to erect precast, insulated sandwich panels with a minimum loss of insulation. The anchor uses standard Fleet-Lift recess plugs and ring clutches.

The P92S Sandwich Panel Erection Anchor is designed for use with 2", 3" and 4" thick insulated sandwich panels. The design of the anchor allows it to distribute anchor loads evenly to both concrete wythes. This is accomplished by the use of two specially bent rebars per sandwich panel anchor. The sandwich panel erection anchor, with its unique anchor head shape, in combination with the two bent rebars, transfers both the anchor's shear and tension loads evenly into each of the concrete wythes.

Place one bent rebar through the anchor's top hole and the second rebar through the anchor's bottom hole. The rebar extend from the anchor into the top and bottom wythe of concrete. The two specially bent rebar must be used with the sandwich panel erection anchor to achieve the safe working loads shown.

The P92SP Sandwich Panel Erection Anchor is similar in design and action to the P92S anchor, and has a built-in shear plate. The shear plate improves shear capacity when used in the 2", 3" and 4" thick wythes.

Pricing Information/Unit Sizes

Product Code Packaging
100217 MADE IN USA 4 TON 6.00" PLAIN MADE IN USA
FL077 IMPORT 4 TON 6.00" PLAIN
FL184 IMPORT 8 TON 6.00" PLAIN
100053 IMPORT 10 TON 7.0" PLAIN
FL077G IMPORT 4 TON 6.00" HOT DIPPED GALV.
FL184G IMPORT 8 TON 6.00" HOT DIPPED GALV.
Specific customer pricing may be available in Dayton Access. Minimum standard packaging sizes may apply.