B18 - Single Flared Coil Loop Insert

Accessories | Wall Forming Accessories

Dayton
The load carrying capacity of any cast-in-place concrete insert is largely dependent upon the ability of the insert to draw upon the tensile strength of the mass of concrete within which it is embedded. The B18 Single Flared Coil Loop Insert makes effective use of this principle by increasing the depth and width of concrete embedment. B18 inserts are available with an optional B3 Screw-on Coil for use with the B30 Screw-on Plastic Cone which acts to set the insert back from the face of the concrete. Minimum spacing between inserts is twice the corner distance.

Pricing Information/Unit Sizes

Product Code Packaging
44250 1/2" X 4" PLAIN
105130 1/2" X 6" PLAIN
44317 3/4" X 6" PLAIN
44320 3/4" X 9" PLAIN
44324 3/4" X 12" PLAIN
44330 3/4" X 9" PLAIN
44334 3/4" X 12" PLAIN
44406 1" X 6" PLAIN
44410 1" X 9" PLAIN
44414 1" X 12" PLAIN
44434 1" X 12" PLAIN
44454 1-1/4" X 12" PLAIN
44464 1-1/2" X 12" PLAIN
44251 1/2" X 4" ELECTRO GALV.
44318 3/4" X 6" ELECTRO GALV.
44321 3/4" X 9" ELECTRO GALV.
44325 3/4" X 12" ELECTRO GALV.
44331 3/4" X 9" ELECTRO GALV.
44335 3/4" X 12" ELECTRO GALV.
44411 1" X 9" ELECTRO GALV.
44415 1" X 12" ELECTRO GALV.
44435 1" X 12" ELECTRO GALV.
44455 1-1/4" X 12" ELECTRO GALV.
105150 1/2" X 9" PLAIN (RSA)
44260 1/2" X 12" PLAIN (RSA)
126328 3/4" X 12" PLAIN (RSA)
Specific customer pricing may be available in Dayton Access. Minimum standard packaging sizes may apply.

B12 - Coil Rod

Accessories | Wall Forming Accessories